The Mortise Lock Installation Kit comes with everything needed to cut professional quality, fast and accurate mortise pockets and face plates for Schlage, Sargent, Corbin Russwin, Kaba, and other door hardware
The mortise jig is quick and simple to set up, self centering and securely clamps onto the door edge securely
This professional kit includes three of the most common carbide-tipped wood cutting bits - 7/8”, 1”, and 1-1/4” diameter. The threaded cutters means cutters can be changed in seconds, without removing the jig from the door. Additional wood-cutting, aluminum-cutting, plunge, and door coring bits are available separately.
For use on hard wood, soft wood, composite doors and even aluminum doors (with the use of special cutters)
TABLE ADJUSTERS: Our mortise machine features integrated clamps and swings arms that align and secure wood for accurate joints. Set your joint length, align the wood in the jig, and cut your mortise or tenon with any plunge router.
TENON MACHINE: Mortise and tenon joints are strong, stable, and used in many projects. It's considered one of the strongest joints next to the common dovetail, and they connect by either gluing or locking into place for a strong outcome.
MORTISE AND TENON TOOLS: Our box includes a 1/4" high-speed up-cut spiral bit, bushing guides for 1/4", 3/8", and 1/2" tenons, a two-part base plate/bushing adapter, centering tool, and adjustment wrench.
ROUTER TABLE ACCESSORIES: Lock your chisel in place and create the perfect setup with our mortising machine. This unit can be mounted directly onto a workbench, a board that clamps in a vise, or a bench.
QUICK AND SECURE: With its tool-free setup, the Trend Lock Jig is very fast to set to any door width from 34mm to 58mm wide; Full-length clamping plate ensures jig remains rock solid in use, secured with locking levers and twin clamping knobs
ADJUSTABLE SIZES: The set of 12 lock face plate and 4 lock case templates supplied are held in the Lock Jig with magnets for fast swapping, requiring just one router and cutter to do both the lock case mortice and the faceplate
FULL INSTRUCTIONS: A comprehensive laminated reference sheet with common lock model also offers a secondary chart on the reverse side for info relating to faceplate and lock case sizes to quickly select the correct templates and achieve perfect results
EASY TO USE: Each template is stamped to indicate the locks it can be used with; 4-lettered plates for lock cases and 12-numbered plates for the faceplates; Simplifying and speeding up the selection process as well as eliminating costly errors
【Versatile Door Lock Mortising Machine】IRONWALLS door lock jig kit is designed for home doors, hotel doors, security doors lock hole opening, slotting or modifying, suitable for mortise lock, electronic lock, password lock, fingerprint lock installation or replacement. Coming with M10 thread angle grinder drilling rod and hand drill adapter, this doors Lock mortiser kit can be used with both angle grinder & electric drill.
【Wide Application】 The maximum drilling depth is 5.11”(13cm); Maximum sliding length is 10.24”(26cm); Door thickness is 0.98”-3.94”(2.5-10cm); The maximum distance for the door edge to the center of the lock is 2.76”(7cm). This professional door lock hole mortising jig for solid wood doors fit for most of door lock installation process.
【Precise Door Lock Slotting】This upgraded multifunctional door lock slot opening tool is featured with dual adjusting clamping feet, which provides more adjusting space for the sliding rails so that ensure two sliding rails are parallel and the slot is vertical. Furthermore, the active clamping feet can be lock to ensure the stability & accuracy while opening lock hole. This mortise jig can ensure perfect fit slot for your door lock and effectively prevent costly mistakes.
【3 Cutter Blades: 18/22/24 MM】This mortise lock drill kit has 3 different hole cutters (Sizes: 18/22/24 mm) made of high hardness Tungsten Carbide steel, quick slotting, sharp edge, smooth & beautiful slotting shape. When choosing the size of blase, please measure the width of guide plate of the lock. The size of the cutter cannot be more than the width of the guide plate.
【Wide Application】 The mortising jig kit is widely used to open new lock hole, open eccentric lock hole, change password lock and change fingerprint lock on wooden doors. You can also use this lock mortiser kit to modify door locks.
【Applicable Door Range】 The lock mortising kit fits wooden doors of 25-100mm (0.98-3.93 inch) thickness. The maximum opening groove depth is 130mm (5.1 inch), and maximum opening groove length is 260mm (10.2 inch).
【High Efficiency & Precise Slotting】 The mortise lock installation kit is much faster, easier, and more precise than using a drill and chisels. You only need to spend ten minutes or even a few minutes to finish the slot. Extremely precise, accurate !
【3 Tungsten Steel Drill Bits】 Tungsten steel alloy cutter head has the characteristics of high hardness, sharpness and not easy to wear. It is special for wooden door. The package includes 3 drill bits. Sizes: 18/22/24 mm (0.79/0.87/0.95 inch).
16 PIECES KIT - This 16-piece door lock mortising kit involves 1 jig kit door lock motiser with 3 cutters, 2 spanners, 1 ruler and 10 accessories. A plastic suitcase is included for easy transport
3 CUTTERS - Cutters made of tungsten steel, higher quality over high-speed steel. Sizes: 20/22/25 mm (0.79/0.87/1 inch). Bigger M10 series with no distortion
APPLICABLE DOOR RANGE - The lock mortising kit can be used on wooden and aluminum doors with thickness under 13.5 cm (5.3 inch). Suitable for installing hotel doors, security doors and door lock modifying
EASY OPERATION - Applying vertical guides with height and depth stops, overrun cutting area will be avoided by using this tool set
Fastest, easiest, least expensive and most accurate way to cut a hinge mortise. Clamps to work so there's no nail holes or other unsightly blemishes. Jig attaches to a 3/4" wood fence you supply with the included hardware. The fence provides chip-free cuts and easy indexing. Two screw-in indexing pins position the fence to the backset you want and insure it's square on the jig.
Made of 10mm (.393”) thick phenolic for heavy duty use, measures 5-5/8" x 7-5/8".
Uses a bearing guided bit (our 8500 - sold separetly), or bushing & bit combination (5030K & 13416 - sold separately), to follow the jig for perfect mortises. Router & bit not included.
We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.