Power: 110V 60HZ; Motor Power: 1.8KW; Charge pressure: 30MPA; Working Pressure: 300BAR 30MPA 4500PSI. Air pump inflating speed: 2800r/min; Work flow: 50L/min; Oil standard: IS0 VG 46 & AW 46.
WIDE APPLICATION: A perfect electric air pump for car tires, bike tires, scuba tanks, fire fighting, paintball, air pistols, leakage detecting, pressure-tight tests, automobiles, bicycles, air impermeability tests, pressure-proof tests, etc.
QUICK-FILL PERFORMANCE: It takes only 30 minutes to fill a 6.8L tank to 300BAR. Designed with two-stage compression and two water-oil separators for performance stability.
COOLING SYSTEM: For smooth performance, you have to prepare cooling water and replace it every 30 minutes for an optimal cooling effect. NEVER START THE MACHINE BEFORE YOU HAVE ENOUGH WATER PREPARED.
3.5 Stage High Pressure Design and High Effency: With the exclusive 3.5 stage design by GX pump, it compresses the maximum amount of air possible from each smooth stroke. That means fewer strokes and less work to fill your air gun. You will also save more power comparing with traditional hand pumps. Test inflating result: Charging 500cc tank from 1000PSI-3000PSI, needs about 350 fills; 200cc Tank from 1000PSI-3000Psi.needs about 140 fills.
With Oil-Moisture Filter : With the new filter design, it can filter above 90% of moisture. So you can feel free to inflate your scuba diving tank without moisture air. When the blue desiccant become red as enough water, you can pour them out for dring by referring to the user manual.
Durable Quality and Durable Performance: With the high quality stainless steel pump body and rubber handle, wide and strong base plate, it can ensure more stable and long-lasting using life. It can bear over 15000 times of tear and wear. At the 200 bar pressure, you can continuously use the pump more than 2 hours.
Specifications: General Output nut: M10*1 (not G1/8) , 8mm wide use quick connector, Max pressure : 310 bar or 4500 psi, Light weight 3.1 kg, Portable size: length 62cm/24.5inch closed, 105cm/41.3inch open
【Effortless and High Effency 】3 Stage Hand Pump , Compresses more air from each smooth stroke, Requires less effort than other pumps and easy to go to The final filling pressure when the pressure up to 2500 psi.
【Wide Application】 Come with 8mm wide use quick connector , This Hand pump can use for PCP pistols, rifles and the Airgun, paintball cylinders,scuba diving tank ,car tire,kayak
【Portable and Foldable】 With the foldable pedal and 2 kg Light weight , it was easy to store and transport , Carry it when you go for hunting trip , Make sure your favorite rifle is ready for action.
【Durable and Safety】Ergonomic rubber Handle and stainless steel construction inside bring Smooth upward and downward motion; Allow over 16000 times of tear and wear,Giving you a long using life.
🎈【Sturdy & Durable】The hand air pump is made of premium stainless steel. It has excellent fading-free and rust-proof performance. Spare parts in package expend the lifetime.
🎈【User Friendly Design】Sleek stainless steel makes it move up and down smoothly. 8mm copper female quick connector allows to withstand over 10,000 times of assemble and disassemble. Built-in oil and water separator for clean and dry gas. TPR padded grips for fatigue-free hand feelings.
🎈【Wide Application】The PCP pump designed for most PCP pre-charged pneumatic airgun. Also great for car tire, motor tire, bicycle, mini scuba tank, kayak, soccer etc.
🎈【Attention】Air tightness test must be done before use PCP Hand Pump. Ensure that the 4 connection ports are not leaking. Manually pump up a few times and keep the posture. If air pressure do not reduce, then test is complete. Otherwise, please check the connection ports again. The air pressure must be vented. When not use, try to keep the PCP pump in the pressure-free state. Hose can’t bend over and don’t crash pressure gauge.
4 Stage Labor-saving High Pressure Hand Pump: This is a new generation four-stage compression air gun hand pump, exclusively designed by SPRITECH senior engineer. Both pulling up and pressing down can output high pressure air, which can greatly improve the efficiency of inflating. And the smooth stainless steel inside can make it much easier to pump up and down. The maximum pressure can reach 30M Pa/4500PSI. Labor-saving, fast and reliable is what this hand pump can bring you.
Double Oil-Moisture Filters: Adopt unique dual Oil-Moisture filtration structure for inlet and outlet. It can greatly improve the filtering effect. Make sure that dry and clean high-pressure air can be provided to your precious air gun. The desiccant beads at the inlet are made of safe Silicone and will change color from blue to pink when wet. After dehumidification, the beads will restore blue and can be used repeatedly. One pack of spare beads are included and very easy to install.
High-quality Durable Materials: High-strength stainless steel pump tube, pure copper one-way valve and bleed valve, soft ergonomic handle grip, wide butterfly-shaped footplate: these features make the PCP air pump more durable and more comfortable. The thick carbon fiber pattern outer layer is scratch-resistant and dirt-resistant. 23.2” flexible hose can bear 80Mpa pressure for safe. The large accurate barometer filled with glycerin is very easy to read and can conveniently monitor air pressure.
Wide Application and Easy to Carry: This hand pump is specially designed for PCP air guns and airbows, which is equipped with an universal 8MM Female Foster quick-disconnect on the end of the hose. It can directly fill PCP air rifles, air pistols, airbows and paintball guns with a Male Foster nozzle on its air reservoir. The foldable footplate and compact structure make it very easy to carry and store. In the field, you can put this pump in your backpack or hold it with your hand conveniently.
【STURDY & DURABLE】- The hand air pump is made of high-quality stainless steel. It has excellent fading-free and rust-proof performance. Spare parts are also manufactured under advanced technology.
【LABOR-SAVING DESIGN】- Three-stage air hand pump’s high pressure can be up to 4500psi. They can also cost you 30% less effort than traditional pumps.
【THOUGHTFUL DESIGN】- The built-in oil-water separator is made for easy operation. The folding design of the high-pressure manual pump provides easy storage and transportation. The ergonomically designed handle is comfortable to hold and labor-saving.
【EASY MONITORING】- Supplied with glycerin filled high accuracy gauge which can accurately monitor the pressure level. More secure and reliable to use.
This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. One of the primary functions of these cookies is to temporarily store location data based on your internet address. This allows us to show you more geographically relevant best seller lists & products from Amazon.
We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.